RaviRaj Technologies - RFID and biometric solutions
ABS hard UHF anti-metal RFID tag for mounting on metal assets

Illustrative product image placeholder  replace with your licensed local product photo

Anti-Metal RFID UHF & HF Tags

Flexible On-Metal RFID Labels and Rugged ABS Hard Tags for Industrial Asset Tracking

Anti-metal RFID tags are designed for applications where ordinary RFID labels may not perform reliably when placed directly on metal. Choose a flexible format for low-profile installation or a rigid hard tag for a more protected mounting solution.

Available formats: Flexible anti-metal labels · ABS hard anti-metal tags · Model-specific HF/NFC anti-metal tags

 

Request Quote / Product Selection Order Information

Email: sales@ravirajtech.com

AI Overview  Anti-Metal RFID UHF & HF Tags

Anti-metal RFID tags are purpose-designed RFID transponders for identifying assets made from or mounted on metal. Their construction helps reduce the detuning and performance loss that can occur when a conventional RFID antenna is placed close to a conductive surface.

Two common mechanical formats are flexible anti-metal labels, which suit thinner or curved mounting locations, and hard anti-metal tags, which use a rigid housing for industrial equipment, containers and fixed assets. The referenced Focus RFID ABS hard tag is a passive UHF model listed for 865868 MHz or 902928 MHz, with an Impinj M4QT chip, EPC 128-bit and User 512-bit memory.

Key Features of Anti-Metal RFID Tags

Flexible vs Hard Anti-Metal RFID Tags

Selection factorFlexible anti-metal tagHard anti-metal tag
ConstructionThin, bendable or conformable label-style construction; exact materials vary by model.Rigid housing; referenced product uses ABS/ASA material.
Installation surfaceUseful where a low-profile label or a curved mounting surface is needed, subject to product limits.Useful for fixed mounting on equipment, containers and other assets.
Physical protectionTypically lower physical protection than a rigid enclosure; check the model rating.Rigid body offers a more protected form factor; confirm IP and environmental ratings.
AttachmentOften adhesive-backed; confirm adhesive and surface preparation requirements.Referenced model supports screw, rivet, glue or optional 3M 300LSE tape.
Best selection criteriaAvailable space, surface curvature, thickness and required read range.Mechanical protection, mounting method, asset geometry and required read range.
RFID frequencyCan be UHF or HF depending on the selected product.Can be UHF or HF depending on the selected product; the cited ABS model is UHF.
Selection note: This is a practical format comparison, not a claim that every flexible tag has identical performance or that every hard tag is waterproof. Confirm the datasheet for the exact model before purchase.

Technical Specifications  Referenced ABS Hard UHF Tag

The following values are transcribed from the Focus RFID product listing. They describe that listed ABS hard tag, not every anti-metal UHF or HF model.

ParameterSupplier-listed specification
Product typeUHF ABS hard anti-metal RFID tag (ST-M 852011 On Metal Tag)
RFID standardEPC Class 1 Gen 2 / ISO 18000-6C
Frequency versions865868 MHz or 902928 MHz
ChipImpinj M4QT
MemoryEPC 128-bit; User 512-bit
OperationPassive; read/write
MaterialABS/ASA
Dimensions85 — 20 — 11 mm (L — W — H)
Storage temperature40°C to +70°C
Operating temperature25°C to +70°C
Storage humidity5% to 95%
InstallationScrew, rivet, glue or optional 3M 300LSE tape
ColourGrey
Data retentionSupplier states up to 50 years
Warranty1 year (supplier-listed)
Drop test1 metre, 200 drops (supplier-reported)
Read rangeSupplier states up to 010 m with EIRP 4 W; up to 06 m with ATID AT880 handheld reader
CustomizationPre-encoding, logo printing and barcode laser marking
The listing also presents catalogue size options of 135 — 22 mm, 80 — 15 mm or custom shape. Confirm the exact size and model code on the quotation because these catalogue attributes may refer to variants rather than the 85 — 20 — 11 mm ST-M 852011 specification.

UHF and HF Anti-Metal RFID: What Is the Difference?

UHF anti-metal RFID tags

UHF tags are used for longer-range identification and inventory workflows when paired with a compatible UHF reader and antenna. The cited ABS model is a UHF tag with regional frequency versions of 865868 MHz or 902928 MHz. Read distance depends on reader power, antenna, tag orientation, metal geometry, installation and local radio regulations.

HF anti-metal RFID tags

HF is a different RFID frequency family from UHF. HF anti-metal products must be selected with a compatible HF reader and the correct chip/protocol. The supplied ABS hard-tag listing does not provide an HF specification; request a separate HF model datasheet for frequency, chip, dimensions, memory and read distance.

Important: Do not order an HF tag for a UHF reader or a UHF tag for an HF reader. Confirm frequency and protocol compatibility with your RFID system integrator.

Industrial Applications

How to Choose the Right Anti-Metal RFID Tag

  1. Confirm frequency: UHF or HF, and the exact regional band.
  2. Check reader compatibility: Match chip, air-interface protocol and reader capabilities.
  3. Measure the mounting area: Confirm tag dimensions, surface curvature and clearance.
  4. Choose the construction: Flexible label for low-profile placement or hard ABS housing for rigid mounting.
  5. Define environment: Temperature, moisture, chemicals, impact and outdoor exposure.
  6. Choose installation: Adhesive, screw, rivet or another approved method.
  7. Test read performance: Pilot the tag on the actual asset with the intended reader and antenna before bulk deployment.

Frequently Asked Questions  Anti-Metal RFID UHF & HF Tags

1. What is an anti-metal RFID tag?
An anti-metal RFID tag is designed with an isolation or shielding structure that helps the RFID antenna operate when mounted on a metal surface. Its construction and performance depend on the model.
2. Why can™t I use a normal RFID label on metal?
Metal can detune an RFID antenna and change its RF behaviour, reducing read reliability. A purpose-designed on-metal tag incorporates a structure intended to manage this effect.
3. What is the difference between flexible and hard anti-metal RFID tags?
Flexible tags are thin and can suit low-profile or curved placements within their bend limits. Hard tags use a rigid housing, such as ABS, and are typically chosen when a more protected, fixed form factor is required.
4. Which is better: flexible or hard anti-metal RFID tags?
Neither is universally better. Choose flexible tags for space and conformability requirements; choose hard tags when rigid mounting and mechanical protection are priorities. Compare the exact datasheets and test on the real asset.
5. What frequency does the referenced ABS hard anti-metal tag use?
The Focus RFID listing specifies UHF regional versions of 865868 MHz or 902928 MHz. Confirm the correct version for the country and reader system before ordering.
6. Does this ABS anti-metal tag support HF or NFC?
The referenced ABS model is specified as UHF. Its listing does not provide HF or NFC chip specifications. Ask for a separate HF anti-metal model datasheet if your system uses HF/NFC.
7. Which chip is used in the listed UHF ABS tag?
The supplier lists an Impinj M4QT chip with EPC 128-bit and User 512-bit memory.
8. What is the size of the ABS hard tag?
The detailed ST-M 852011 specification gives 85 — 20 — 11 mm. The broader product attributes also mention 135 — 22 mm, 80 — 15 mm or custom shapes. Confirm the exact variant.
9. What is the reading distance of the UHF on-metal tag?
The supplier states up to 010 metres with EIRP 4 W and up to 06 metres with an ATID AT880 handheld reader. Actual range varies with reader, antenna, installation, asset geometry and local RF limits.
10. Is the ABS UHF RFID tag waterproof?
The supplier describes it as waterproof and acid/alkali resistant, but the listing does not state a specific IP rating. Request an IP test report if a defined ingress-protection level is required.
11. How is the hard anti-metal RFID tag installed?
The listing supports screw, rivet, glue or optional 3M 300LSE tape. Select the attachment based on the asset material, surface preparation and maintenance requirements.
12. Can I print a company logo or barcode on the tag?
Yes. The supplier lists logo printing, barcode laser marking, number marking and pre-encoding as customization options. Confirm artwork format, proof approval and order quantity before production.
13. Does the tag need a battery?
No. The referenced ABS tag is listed as passive RFID, meaning it does not require an onboard battery; it is energized by the reader™s RF field.
14. What temperature range does the referenced ABS tag support?
The supplier lists an operating temperature of 25°C to +70°C and a storage temperature of 40°C to +70°C.
15. What are the common uses of UHF anti-metal tags?
Typical uses include fixed asset management, IT equipment tracking, metal container management, industrial equipment tracking, storage management and personnel patrol systems.
16. How do I choose between UHF and HF?
Choose based on your reader infrastructure, required read distance, application workflow, data protocol and local RF requirements. UHF and HF use different frequency bands and are not interchangeable.
17. Can the read range be guaranteed at 10 metres?
No universal 10-metre guarantee should be assumed. The supplier™s stated maximum is a test-condition claim. Validate the read range on the target asset with the final reader, antenna and mounting position.
18. Can RaviRaj Technologies help select an anti-metal RFID tag?
Contact RaviRaj Technologies with your required frequency (UHF or HF), reader model, asset material, mounting area, environment and target read distance to discuss a suitable tag specification and quotation.

Why Contact RaviRaj Technologies?

For an accurate recommendation, share: UHF/HF frequency, reader make and model, metal asset type, required read distance, installation method, operating environment and approximate quantity.
Email for Product Enquiry